ZyXEL G-120 User’s Guide
Chapter 3 Wireless LAN Network
33
3.3.1.1 AP
On the P-334WT, you can enable OTIST using the
Reset
button or the web configurator. If
you use the
Reset
button, the default (01234567) or previous saved (through the web
configurator)
Setup
key
is used to encrypt the settings that you want to transfer.
Hold in the
Reset
button for one or two seconds.
Note:
If you hold in the
Reset
button too long, the device may reset to the factory
defaults!
In the web configurator, go to the
Wireless LAN
main screen and then select
OTIST
. To
change the
Setup
key
, enter zero to eight printable characters. To have OTIST automatically
generate a WPA-PSK key, select the
Yes
check box. If you manually configured a WEP key
or a WPA-PSK key and you also selected this check box, then the key you manually
configured is used.
Summary of Contents for G-120
