ZyXEL G-120 User’s Guide
50
Chapter 4 ZyXEL Utility Configuration
Figure 27
Profile: Select a Channel
The following table describes the labels in this screen.
3
If you select
Infrastructure
network type in the first screen, select
WEP
,
WPA-PSK
,
WPA-RADIUS
,
WPA2-PSK
,
WPA2-RADIUS
or
RADIUS
from the drop-down list
box to enable data encryption. If you select
Ad-Hoc
network type in the first screen, you
can only use
WEP
encryption method. Otherwise, select
Disabled
to allow the G-120 to
communicate with the access points or other peer wireless computers without any data
encryption and skip to step
5
.
Table 12
Profile: Select a Channel
LABEL
DESCRIPTION
Wireless Settings
Channel
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Wireless Mode
This displays
b+g
and allows the G-120 to connect to either an IEEE 802.11g or
IEEE 802.11b wireless device.
Summary of Contents for G-120
