background image

 

 

6

 
 

Chapter 1 - Introduction 

 

Thank you for purchasing the

 

54M Wireless LAN Module. This high-speed Wireless 

LAN Module

 

provides you with an innovative wireless networking solution. The 

Adapter is easy to set up and use. With this innovative wireless technology, you can 
share files and printers on the network—without inconvenient wires!   
 
The Module is a network Module with a rate of 1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48   
and 54 Mbps operating in the ISM band using Direct Sequence Spread Spectrum 
(DSSS) transmission implementing the IEEE 802.11g draft standard. This Module 
provides Device Drivers for Windows Operating Systems. It also provides tools 
for the configuration of the Module. The tool, as well as the installation steps of 
the plug-and-play procedure for the Windows operating systems, is described in 
this document. 

 
Features 

 
The 54M Wireless LAN Module offers compliance with the IEEE 802.11g draft 
specification. This feature allows them to communicate with other wireless 
devices that support the standard. Features of the Module are: 

 

 

Uses 2.4GHz frequency band, which complies with worldwide 
requirement 

 

Wireless interface following the IEEE 802.11g and 802.11b standard   

 

Using MiniPCI interface 

 

Enciphering/deciphering of wireless data by the implementation of the 
WEP/WPA/WPA2 algorithm   

 

Wire-free access to networked resources from anywhere beyond the 
notebook 

 

Allows users move between Access Points without resetting their 
connection reconfiguration 

 

Delivers data rate up to 54 Mbps 

 

Supports    1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48    and 54 Mbps rates 

 

Provide Wireless LAN Card Configuration utility 

 

The module uses external Antenna 

 

 

Supports most popular operating systems

 

 

Summary of Contents for G-620



















Reviews: