manualshive.com logo in svg

ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H, User Manual

The ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H is a powerful device that ensures secure and reliable internet connectivity. To set up and make the most of its features, download the free User Manual from our website, 88.208.23.73:8080, to easily access step-by-step instructions and troubleshooting guidance.

Share
Download
background image

 Chapter 35 Menus 24.8 to 24.11

P-793H User’s Guide

341

35.4  Remote Management

To disable remote management of a service, select 

Disable

 in the corresponding 

Server 

Access 

field. Enter 11 from menu 24 to bring up 

Menu 24.11 - Remote Management 

Control

.

Current Time

This field displays an updated time only when you reenter this menu.

New Time 

(hh:mm:ss)

Enter the new time in hour, minute and second format. This field is available when 

you select 

None

 in the 

Time Protocol

 field.

Current Date

This field displays an updated date only when you reenter this menu.

New Date (yyyy-

mm-dd)

Enter the new date in year, month and day format. This field is available when you 

select 

None

 in the 

Time Protocol

 field.

Time Zone

Press [SPACE BAR] and then [ENTER] to set the time difference between your 

time zone and Greenwich Mean Time (GMT). 

Daylight Saving

Daylight Saving Time is a period from late spring to early fall when many countries 

set their clocks ahead of normal local time by one hour to give more daylight time in 

the evenings. If you use daylight savings time, then choose 

Yes

.

Start Date (mm-

nth-week-hr)

Configure the day and time when Daylight Saving Time starts if you selected 

Yes

 

in the

 Daylight Saving 

field. The 

hr 

field uses the 24 hour format. Here are a 

couple of examples:
Daylight Saving Time starts in most parts of the United States on the first Sunday 

of April. Each time zone in the United States starts using Daylight Saving Time at 2 

A.M. local time. So in the United States you would select 

Apr.

, 

1st

, 

Sun.

  and type 

02 in the 

hr

 field.

Daylight Saving Time starts in the European Union on the last Sunday of March. All 

of the time zones in the European Union start using Daylight Saving Time at the 

same moment (1 A.M. GMT or UTC). So in the European Union you would select  

Mar.

, 

Last

, 

Sun.

 The time you type in the 

hr

 field depends on your time zone. In 

Germany for instance, you would type 02 because Germany's time zone is one 

hour ahead of GMT or UTC (GMT+1). 

End Date (mm-

nth-week-hr)

Configure the day and time when Daylight Saving Time ends if you selected 

Yes

 in 

the

 Daylight Saving 

field. The 

hr

 field uses the 24 hour format. Here are a couple 

of examples:
Daylight Saving Time ends in the United States on the last Sunday of October. 

Each time zone in the United States stops using Daylight Saving Time at 2 A.M. 

local time. So in the United States you would select 

Oct.

, 

Last

, 

Sun. 

and type 02 in 

the 

hr

 field.

Daylight Saving Time ends in the European Union on the last Sunday of October. 

All of the time zones in the European Union stop using Daylight Saving Time at the 

same moment (1 A.M. GMT or UTC). So in the European Union you would select 

Oct.

, 

Last

, 

Sun.

 The time you type in the 

hr

 field depends on your time zone. In 

Germany for instance, you would type 02 because Germany's time zone is one 

hour ahead of GMT or UTC (GMT+1). 

Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to 

Cancel“ to save your configuration, or press [ESC] to cancel.

Table 128   

Menu 24.10: System Maintenance - Time and Date Setting (continued)

FIELD

DESCRIPTION

Summary of Contents for G.SHDSL.bis 4-port Security Gateway P-793H





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for G.SHDSL.bis 4-port Security Gateway P-793H

Vega BS Series User Manual preview
BS Series
Brand: Vega Pages: 39
Patton SmartNode 10100 Series Quick Start Manual preview
SmartNode 10100 Series
Brand: Patton Pages: 12
Patton FiberPlex FPX6000 Series Quick Start Manual preview
FiberPlex FPX6000 Series
Brand: Patton Pages: 20
Patton SmartNode 4970 Series User Manual preview
SmartNode 4970 Series
Brand: Patton Pages: 57
IFM Electronic ASinterfoce AC1325 Installation Instructions Manual preview
ASinterfoce AC1325
Brand: IFM Electronic Pages: 23
ZyXEL Communications P-660HN-Fx series Quick Start Manual preview
P-660HN-Fx series
Brand: ZyXEL Communications Pages: 12
Sencore DMG 1200 User Manual preview
DMG 1200
Brand: Sencore Pages: 37
Hirschmann OpEdge-8D User Manual preview
OpEdge-8D
Brand: Hirschmann Pages: 44
Allied Telesis AT-iMG626MOD Datasheet preview
AT-iMG626MOD
Brand: Allied Telesis Pages: 3
Zoom IG-4160 User Manual preview
IG-4160
Brand: Zoom Pages: 48
Zoom 4150 Installation Reference Manual preview
4150
Brand: Zoom Pages: 72
Kaon PG2141 Quick Installation Manual preview
PG2141
Brand: Kaon Pages: 5
Fluke COMARK 3927739 Service Manual preview
COMARK 3927739
Brand: Fluke Pages: 65
D.I.P. CDN366 User Manual preview
CDN366
Brand: D.I.P. Pages: 93
TEKTELIC Communications KONA ENTERPRISE T0007242 User Manual preview
KONA ENTERPRISE T0007242
Brand: TEKTELIC Communications Pages: 15
VBOX XTI 3442 Quick Installation Manual preview
XTI 3442
Brand: VBOX Pages: 40
ActionTec GT704-WG User Manual preview
GT704-WG
Brand: ActionTec Pages: 127
Asyril Asycube CC-Link Gateway User Manual preview
Asycube CC-Link Gateway
Brand: Asyril Pages: 21

Brands by name

Popular brands

Load more brands