Chapter 34 Access Control
GS1350 Series User’s Guide
274
34.4 Set Up Login Accounts
Up to five people (one administrator and four non-administrators) may access the Switch via Web
Configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The username for the
Administrator is always
admin
. The default administrator password is
1234
.
Note: It is highly recommended that you change the default administrator password (
1234
).
• A non-administrator (username is something other than
admin
) is someone who can view and/or
configure Switch settings. The configuration right varies depending on the user’s privilege level.
Click
Management
>
Access Control
>
Logins
to view the screen as shown.
Group
SNMP v3 adopts the concept of View-based Access Control Model (VACM) group. SNMP
managers in one group are assigned common access rights to MIBs. Specify in which SNMP
group this user is.
admin
– Members of this group can perform all types of system configuration, including the
management of administrator accounts.
readwrite
– Members of this group have read and write rights, meaning that the user can
create and edit the MIBs on the Switch, except the user account and AAA configuration.
readonly
– Members of this group have read rights only, meaning the user can collect
information from the Switch.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
Save
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to reset the fields to your previous configuration.
Clear
Click
Clear
to reset the fields to the factory defaults.
Index
This is a read-only number identifying a login account on the Switch. Click on an index number
to view more details and edit an existing account.
Username
This field displays the username of a login account on the Switch.
Security Level
This field displays whether you want to implement authentication and/or encryption for SNMP
communication with this user.
Authentication This field displays the authentication algorithm used for SNMP communication with this user.
Privacy
This field displays the encryption method used for SNMP communication with this user.
Group
This field displays the SNMP group to which this user belongs.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 135 Management > Access Control > SNMP > User (continued)
LABEL
DESCRIPTION
