10
rev.1.0a
If your PC is configured correctly, you will see the login page of the switch
as shown by Figure 9 below.
Figure 8: Web Interface login page
If you do not see the above login page, please perform the following
steps:
- Refresh the web page.
- Check to see if there is an IP conflict issue.
- Clean browser cookies and temporary internet files.
- Check your PC settings again and repeat step 2.
6.
Enter the factory default username and password in login page.
Click “Login” to log in
to the switch.
Note:
The factory default Username of the switch is
admin
.
There is no factory default Password of the switch.
