Chapter 8 Basic Setting
GS1915 Series User’s Guide
85
C
HAPTER
8
Basic Setting
8.1 Overview
This chapter describes how to configure the
System Info
,
General Setup
,
Switch Setup
,
IP Setup
,
Port
Setup
,
PoE Setup
,
Interface Setup
,
IPv6
, and
Cloud Management
screens.
8.1.1 What You Can Do
• Use the
System Info
) to check the firmware version number and
system resource usage.
• Use the
General Setup
screen (
) to configure general settings such as the
system name and time.
• Use the
Switch Setup
screen (
) to choose your VLAN type and assign priorities
to queues.
• Use the
IP Setup
screen (
) to configure the Switch IP address, default gateway
device, management VLAN ID, and proxy server.
• Use the
Port Setup
screen (
) to configure Switch port settings.
• Use the
PoE Setup
screens (
) to view the current amount of power that PDs are
receiving from the Switch and set the priority levels for the Switch in distributing power to PDs. This
screen is available for PoE models only.
• Use the
Interface Setup
screens (
) to configure Switch interface type and
interface ID settings.
• Use the
IPv6
screens (
) to view IPv6 status and IPv6 configuration.
• Use the
Cloud Management
screen (
) to allow remote management of the
Switch using Nebula.
8.2 System Information
In the navigation panel, click
Basic Setting
>
System Info
to display the screen as shown. Use this screen
to view general system information.
