SAM1008 line module
• One console port-: Mini-RJ-11(4P4C)
• One Ethernet port - RJ45 10/100 Mbps
• 8-port G.SHDSL- RJ-11 connector
• Status LEDs- System Status, Ethernet Link Status,
Ethernet Active Status, G.SHDSL ports status,
Alarm
• Compliant with ITU-T G.991.2
• TC-PAM modulation
• Transmission rate: 192k ~ 2.3Mbps, 64kbps
increments over single copper pair
• All front access
• Hot-swappable
SAM1216-22 line module
• One Telco 50 connectors for 16-port G.SHDSL.bis
• One mini RJ11 console port for local
management
• Two 10/100Base-TX for uplink
• In-band Ethernet management
• Status LEDs- System Status, Ethernet Link Status,
Ethernet Active Status, G.SHDSL.bis ports status,
Alarm
• Line coding: TC-PAM
• Transmit power: up to 16.8 dBm
• Density: 16 ports per chip
• SHDSL payload format: ATM
• Rate Adaptation Mode: fixed, line probing
• Up to 4096kbps in single pair, m-pairs (2/4 pairs
mode) bonding support up to 16.384Mbps
• Annex A and annex B PSD mask
• SHDSL line profile
• SHDSL alarm profile
• Power backoff
• Standard Compliant
- ETSI SDSL (ETSI TS 101 524 V 1.2.1)
- ITU G.shdsl (ITU-T G.991.2 (2001))
- ITU G.shdls.bis (ITU-T G.991.2 (2004))
VOP1224-61 line module
• One Telco 50 connectors for 24-FXS ports over
POTS
• One mini RJ11 console port for local
management
• Two 10/100Base-TX for uplink
• Ringer Max output power : 14 Watt
• Support SIP singling protocol
• Support G.711, G.726, G.729 a/b, G.723.1
• Support T.38 Fax/Modem signal coding & Fax
Relay (G.711 a/m)
• Echo cancellation based on ITU-T G.168 , G.165
• Silence detection/suppression and Comfort
Noise Generation (CNG)
• Voice Activity Detection (VAD)
• Caller ID detection (for VoIP packets from uplink)
• 10 K Business Hour Call Attempts (BHCA)
• Configurable jitter buffer
• Support the generation of dial tone, second dial
tone, ringing tone (ring-back tone), busy tone,
off-hook warning tone
• Support call waiting, call hold, call transfer, return
and call back on busy
• MLT (Metallic loop testing for subscriber lines)
and GR-909 loop diagnostic
Physical Specifications
IES-1000M
• Dimension: 440 (W) x 320 (D) x 46 (H) mm
• Weight : 3.7 Kg
AAM1212-51
• Dimension: 170 (W) x 320 (D) x 35 (H) mm
• Weight : 0.9 Kg
AAM1212-53
• Dimension: 170 (W) x 320 (D) x 35 (H) mm
• Weight : 0.9 Kg
SAM1008
• Dimension: 170 (W) x 320 (D) x 35 (H) mm
• Weight : 0.9 Kg
SAM1216-22
• Dimension: 170 (W) x 320 (D) x 35 (H) mm
• Weight : 0.9 Kg
VOP1224-61
• Dimension: 170 (W) x 320 (D) x 35 (H) mm
• Weight : 0.8 Kg
Environmental specification
• Power Supply (AC/DC)
- AC Power: 100 ~ 240V AC, 50 ~ 60Hz
- DC Power: -36 ~ -72 V DC
• Power Consumption
- AAM1212-51: 25W
- AAM1212-53: 25W
- SAM1008: 8.59W
- SAM1216-22: 25W
- VOP1224-61 : 30W
• Operating Temperature: 0
°
C ~ 50
°
C
• Storage Temperature: -40
°
C ~ 70
°
C
• Operating Humidity:10% ~ 90% (non-
condensing)
• Storage Humidity: 10% ~ 95% (non-
condensing)
Certification
• Safety
- UL 60950-1
- CSA 60950-1
- EN60950-1
- IEC 60950-1
• EMC
- FCC Part 15B Class A
- EN55022 Class A
- EN55024 Class A
- ETSI 300386
• Reliability
- ETSI 300019
• Telecom
- ITU-T K20
G.SHDSL Line Card
SAM1008
ADSL2+ Line Card
AAM1212-51/53
G.SHDSL.bis Line Card
SAM1216-22
VoIP Line Card
VOP1224-61
1U IP DSLAM with AC/DC Power
IES-1000
