Chapter 9 VLAN
XMG1930 Series User’s Guide
130
9.6 Configure VLAN Port Settings
Use this screen to configure the static VLAN (IEEE 802.1Q) settings on a port. Click the
VLAN Port Setup
link
in the
VLAN Configuration
screen.
Figure 95
Advanced Application > VLAN > VLAN Configuration > VLAN Port Setup
Add
Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Clear
Click
Clear
to start configuring the screen again.
VID
This field displays the ID number of the VLAN group. Click the number to edit the VLAN settings.
Active
This field indicates whether the VLAN settings are enabled (
Yes
) or disabled (
No
).
Name
This field displays the descriptive name for this VLAN group.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
Delete
to remove the selected entry from the summary table.
Cancel
Click
Cancel
to clear the check boxes.
Table 54 Advanced Application > VLAN > VLAN Configuration > Static VLAN Setup (continued)
LABEL
DESCRIPTION
