Chapter 37 Maintenance
XMG1930 Series User’s Guide
314
37.8.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.
37.8.5 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the
Management
>
Access Control
>
Service Access Control
screen.
• The IP addresses in the
Management
>
Access Control
>
Remote Management
screen does not
match the client IP address. If it does not match, the Switch will disconnect the FTP session
immediately.
Table 159 General Commands for GUI-based FTP Clients
COMMAND
DESCRIPTION
Host Address
Enter the address of the host server.
Login Type
Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type
Transfer files in either single-byte printable characters (plain text format) or in binary
mode. Configuration and firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory
Specify the default local directory (path).
