Chapter 41 Syslog Setup
XMG1930 Series User’s Guide
343
Add
Click
Add
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Clear
Click
Clear
to return the fields to the factory defaults.
Index
This is the index number of a syslog server entry. Click this number to edit the entry.
Active
This field displays
Yes
if the device is to send logs to the syslog server.
No
displays if the
device is not to send logs to the syslog server.
IP Address
This field displays the IP address of the syslog server.
UDP Port
This field displays the port of the syslog server.
Log Level
This field displays the severity level of the logs that the device is to send to this syslog server.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
Delete
to remove the selected entries.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 178 Management > Syslog Setup (continued)
LABEL
DESCRIPTION
