Chapter 1 Getting to Know Your Switch
XMG1930 Series User’s Guide
25
The following table describes the PoE features of the Switch by model.
1.2 Example Applications
This section shows a few examples of using the Switch in various network environments. Note that the
Switch in the figure is just an example Switch and not your actual Switch.
1.2.1 PoE Example Application
The following example figure shows a Switch supplying PoE (Power over Ethernet) to Powered Devices
(PDs) such as an IP camera, a wireless router, an IP telephone and a general outdoor router that are not
within reach of a power outlet.
Table 4 XMG1930 Series Model and PoE Features
PoE FEATURES
XMG1930-30HP
IEEE 802.3af PoE
Yes
IEEE 802.3at PoE+
Yes
IEEE 802.3bt PoE++
Yes
Power Management Mode
Consumption mode (default) / Classification mode
PoE Power Budget
700 W
Table 5 PoE Standards
PoE FEATURES
PoE
PoE+
PoE++
IEEE Standard
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
PoE Type
Type 1
Type 2
Type 3
Switch Port Power
Maximum Power Per Port
15.4 W
30 W
60 W
Port Voltage Range
44 – 57 V
50 – 57 V
50 – 57 V
Cables
Twisted Pairs Used
2-pair
2-pair
4-pair
Supported Cables
Cat3 or better
Cat5 or better
Cat5 or better
