background image

Chapter 19 Tools

NBG-510S User’s Guide

128

Figure 85   

Maintenance > Tools > Configuration: Upload Restart 

"

Do NOT turn off the ZyXEL Device while configuration file upload is in 
progress.

4

After the ZyXEL Device finishes rebooting, the login screen displays (you may need to 
refresh your browser to get it to appear). You may need to change the IP address of your 
computer to be in the same subnet as that of the ZyXEL Device LAN IP address 
(192.168.1.1).

19.2.3  Device Reset 

You can use the

 Configuration

 screen to clear all your custom settings and return the ZyXEL 

Device to its factory defaults. 

1

Click the 

Reset

 button in this section to clear all user-entered configuration information 

and return the ZyXEL Device to its factory defaults. The following warning screen 
appears. 

Figure 86   

Reset Warning Message 

2

The following screen displays while the ZyXEL Device restarts.

Figure 87   

Maintenance > Tools > Configuration: Reset Restart 

Summary of Contents for NBG-510S



















































































































































































































Reviews: