background image

Chapter 3 The Web Configurator

NBG-510S User’s Guide

38

In the 

Old Password

 field, enter the current password. Enter the new password (up to 31 

printable ASCII characters with no spaces allowed) in the 

New Password

 and the 

Re-type to 

Confirm

 fields. Click 

OK

 to save the changes. 

3.6  Device Reset

You can reset the ZyXEL Device

 

using the 

RESET

 button. You need to reset your ZyXEL 

Device to the factory default settings if

• you have changed the default administrator login password and have now forgotten it. 

or

• you want to start configuring the ZyXEL Device again from the default settings. 

"

Resetting your device back to the defaults erases all your custom settings.

Follow the steps below to reset the ZyXEL Device using the 

RESET

 button panel. 

1

Make sure the 

PWR 

LED is on and not blinking. 

2

Use a pointed object to press the 

RESET

 button in for five seconds and release it. The 

device restarts with the factory default settings (the default LAN IP address is 

192.168.1.1

 and the administrator login password is 

1234

). 

3

Wait until the device finished rebooting before accessing the web configurator again. 

Summary of Contents for NBG-510S



















































































































































































































Reviews: