ZyXEL Communications Corp.
Proprietary & Confidential Information
Specifications are subject to change without notice
iii
1. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to the antenna (installed to end
product) shall not be less than 20 cm (8 inches) during normal operation.
1.
This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter
As long as the 2 conditions above are met, further transmitter testing will
not be
required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this
module installed (for example, digital device emission, PC peripheral
requirements, etc.).
Additional Information that Must be Provided to OEM Integrators:
The end user should NOT be provided any instructions on how to remove or install the device.
IMPORTANT NOTE.
1) In the event that these conditions cannot be met (for example certain laptop configurations or
co-location with another transmitter), then the FCC authorization is no longer considered valid and
the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate
FCC authorization.
2) To comply with FCC RF exposure compliance requirements, the antenna used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter."
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be installed
such that 20 cm may be maintained between the antenna and users (for example access points,
routers, wireless ASDL modems, and similar equipment). The final end product must be labeled in
a visible area with the following: "Contains TX FCC ID:
I88NWD670
