ZyXEL Communications P-2302HWUDL-P1 Series Support Notes Download

Page: 58 / 185

P2302HWUDL-P1 Support Notes

All contents Copyright



2007 ZyXEL Communications Corporation.

Key Settings:

DHCP Setup

If the ZyXEL Device's DHCP server is enabled, the IP pool for the clients can be any of

the three networks.

TCP/IP Setup

Enter the first LAN IP address for the ZyXEL Device. This will create the first route in

the enif0 interface.

Edit IP Alias

Toggle to

'Yes'

to enter menu 3.2.1 for setting up the second and third networks.

2. Edit the second and third networks in menu 3.2.1 by configuring the ZyXEL Device's second and third LAN

IP addresses.

Menu 3.2.1 - IP Alias Setup

IP Alias 1=

Yes

IP Address=

192.168.2.1

IP Subnet Mask=

255.255.255.0

RIP Direction= None

Version= RIP-1

Incoming protocol filters=

Outgoing protocol filters=

IP Alias 2=

Yes

IP Address=

192.168.3.1

IP Subnet Mask=

255.255.255.0

RIP Direction= None

Version= RIP-1

Incoming protocol filters=

Outgoing protocol filters=

Enter here to CONFIRM or ESC to CANCEL:

Key Settings:

IP Alias 1

Toggle to

'Yes'

and enter the second LAN IP address for the ZyXEL Device. This will

create the second route in the enif0:0 interface.

IP Alias 2

Toggle to

'Yes'

and enter the third LAN IP address for the ZyXEL Device. This will

create the third route in the enif0:1 interface.

Summary of Contents for P-2302HWUDL-P1 Series












































































































































































Search results

Summary of Contents for P-2302HWUDL-P1 Series

Reviews:

Related manuals for P-2302HWUDL-P1 Series

Brands by name

Popular brands

ZyXEL Communications P-2302HWUDL-P1 Series, Support Notes

Search results

Summary of Contents for P-2302HWUDL-P1 Series

Reviews:

Related manuals for P-2302HWUDL-P1 Series

Brands by name

Popular brands