background image

 Chapter 19 Tools

P-320W v3 User’s Guide

181

If the upload was not successful, the following screen will appear. Click 

Return

 to 

go back to the 

Firmware

 screen.

Figure 107   

Upload Error Message

19.4  Configuration Screen

Information related to factory defaults, backup configuration, and restoring 
configuration appears as shown next.

Click

Maintenance > Tools

 > 

Configuration

.

Figure 108   

Maintenance > Tools > Configuration 

19.4.1  Backup Configuration

Backup configuration allows you to back up (save) the P-320W v3’s current 
configuration to a file on your computer. Once your P-320W v3 is configured and 
functioning properly, it is highly recommended that you back up your configuration 
file before making configuration changes. The backup configuration file will be 
useful in case you need to return to your previous settings. 

Click

Backup

 to save the P-320W v3’s current configuration to your computer.

Summary of Contents for P-320W v3







































































































































































































































































Reviews: