manualshive.com logo in svg

ZyXEL Communications P-324, User Manual

The ZyXEL Communications P-324 is a high-performance network router designed for seamless connectivity. To make the most of its features, we provide a comprehensive User Manual with detailed instructions. Download the free manual from our website 88.208.23.73:8080 to ensure a smooth and hassle-free user experience.

Share
Download
background image

Prestige 324 User’s Guide 

List of Tables

 

xxv

 

Table 15-2 Menu 1.1 Configure Dynamic DNS........................................................................................... 15-4

 

Table 16-1 MAC Address Cloning in WAN Setup....................................................................................... 16-1

 

Table 16-2 Menu 2: Dial Backup Setup ....................................................................................................... 16-3

 

Table 16-3 Advanced WAN Port Setup: AT Commands Fields ................................................................... 16-4

 

Table 16-4 Advanced WAN Port Setup: Call Control Parameters ............................................................... 16-5

 

Table 16-5 Menu 11.1 Remote Node Profile (Backup ISP) ......................................................................... 16-6

 

Table 16-6 Menu 11.3: Remote Node Network Layer Options.................................................................... 16-9

 

Table 16-7 Menu 11.4: Remote Node Script.............................................................................................. 16-12

 

Table 17-1 Menu 3.2: DHCP Ethernet Setup Fields .................................................................................... 17-2

 

Table 17-2 Menu 3.2: LAN TCP/IP Setup Fields ........................................................................................ 17-4

 

Table 17-3 Menu 3.2.1: IP Alias Setup......................................................................................................... 17-5

 

Table 18-1 Menu 4: Internet Access Setup  (Ethernet)................................................................................. 18-2

 

Table 18-2 New Fields in Menu 4 (PPTP) Screen ....................................................................................... 18-4

 

Table 18-3 New Fields in Menu 4 (PPPoE) screen ...................................................................................... 18-5

 

Table 19-1 Menu 11.1 Remote Node Profile for Ethernet Encapsulation .................................................... 19-2

 

Table 19-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific) ............................................................... 19-5

 

Table 19-3 Menu 11.1 Remote Node Profile for PPTP Encapsulation......................................................... 19-6

 

Table 19-4 Remote Node Network Layer Options....................................................................................... 19-7

 

Table 19-5 Menu 11.6: Traffic Redirect Setup ........................................................................................... 19-10

 

Table 20-1 Menu12.1 Edit IP Static Route................................................................................................... 20-2

 

Table 21-1 Applying NAT in Menus 4 & 11.3 ............................................................................................. 21-3

 

Table 21-2 SUA Address Mapping Rules .................................................................................................... 21-5

 

Table 21-3 Menu 15.1.1 First Set................................................................................................................. 21-7

 

Table 21-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set................................................ 21-8

 

Table 21-5 Menu 15.3 Trigger Port Setup.................................................................................................. 21-18

 

Table 23-1 Abbreviations Used in the Filter Rules Summary Menu............................................................ 23-5

 

Table 23-2 Rule Abbreviations Used ........................................................................................................... 23-6

 

Summary of Contents for P-324

































































































































































































































































































































































Reviews:

No comments

Related manuals for P-324

Spectrum Brands KEVO Gateway Setup preview
KEVO Gateway
Brand: Spectrum Brands Pages: 2
OpenVox VS-GW2120-44W User Manual preview
VS-GW2120-44W
Brand: OpenVox Pages: 76
Moxa Technologies AIG-501-T-AZU-LX Quick Installation Manual preview
AIG-501-T-AZU-LX
Brand: Moxa Technologies Pages: 8
Fermax Cityline Installer Manual preview
Cityline
Brand: Fermax Pages: 28
SSS Siedle SET CLVSG 850-1 Product Information preview
SET CLVSG 850-1
Brand: SSS Siedle Pages: 32
NETGEAR DEVG2020 DOT User Manual preview
DEVG2020 DOT
Brand: NETGEAR Pages: 25
NETGEAR CG814WG Installation Manual preview
CG814WG
Brand: NETGEAR Pages: 2
MCK PBXgateway Quick Installation Manual preview
PBXgateway
Brand: MCK Pages: 18
MOKO MKGW2-LW Configuration Manual preview
MKGW2-LW
Brand: MOKO Pages: 34
iS5 iSG4F User Manual preview
iSG4F
Brand: iS5 Pages: 184
ActionTec PK5001A Quick Start Manual preview
PK5001A
Brand: ActionTec Pages: 6
enphase IQ Combiner 3C-ES Quick Install Manual preview
IQ Combiner 3C-ES
Brand: enphase Pages: 8
enphase Envoy-S Installation Manual preview
Envoy-S
Brand: enphase Pages: 32
Lantronix G526 Quick Start Manual preview
G526
Brand: Lantronix Pages: 2
Lauda M2M SIM card Installation And Configuration Manual preview
M2M SIM card
Brand: Lauda Pages: 24
Lucent Technologies RiNOCO RG-1000 Getting Started preview
RiNOCO RG-1000
Brand: Lucent Technologies Pages: 33
HOOC Connect H LT Base REG Quick Start Manual preview
Connect H LT Base REG
Brand: HOOC Pages: 2
Arris SURFboard SBG6950 User Manual preview
SURFboard SBG6950
Brand: Arris Pages: 22

Brands by name

Popular brands

Load more brands