ZyXEL Confidential
340PE10C0.doc
6/42
When you use reset button to start OTIST, it also can general WPA-PSK key
2[BUGFIXED]
Symptom: After disable SIP ALG, MBM can’t work for VOIP traffic.
Condition: (1)disable SIP ALG via C/I command,
(2) Set a rule in MBM for SIP application
(3)use a ATA to dial to another SIP client via SIP proxy, the traffic can’t managed
by MBM.
3[BUGFIXED]
SPRID:050419922
Symptom: then redirect to the page of Test Frame ceaselessly
Condition:
When popup the page of change username and password in zero configurations, input the
inaccurate username and password,
Modifications in V 3.40(PE.9)b1| 4/11/2005
1Support ADSL 2+ by TI modem code 3.2.6
2 [Feature Update]
add mutiboot firmware upgrade feature
3 [Feature Enhancement]
Add SIP ALG enable /disable in eWC(by default disable)
4 [Feature Enhancement]
In GUI ,add a checkbox to control wireless g+ (by default enable)
5[Feature Enhancement]
Diffserv in MBM.
6 [Feature Enhancement]
MBM mapping to ATM queque
4.5.6.7-> ATM high queue
0.1.2.3->ATM low queue
7[Feature Enhacnement]
Add a drop list for user to choose “802.11g only””802.11b only” ”mixed ”
8 [Feature Enhacement]
Pop-up a warning message” your pass word username is wrong please check”, if user enter
the wrong id and password when doing zeroconfig
9 change default MAC to 001349000001
10. [BUG FIXED]
TE report device will reboot about 3%-7% when change wireless config.
11[BUGFIXED]
Symptom: it should show test html and popup a success html or change username or
password html. But it show nothing else login GUI.
Condition: when zero configure is enable .
12. [BUG FIXED]
Symptom: device will crash
Condition: we ftp to device and then change to http in IE browser
13 [BUG FIXED]
