P-660R-Tx v3 Series Support Notes
35
All contents copyright © 2008 ZyXEL Communications Corporation.
P-660R-Tx v3, a server must have a fixed IP address and not be a DHCP
client whose IP address potentially changes each time P-660R-Tx v3 is
powered on.
Configuration
To make a server visible to the outside world, specify the port number of the
service and the inside address of the server in Web Configurator, Advanced
Setup,
Advance Setup -> NAT -> DMZ.
The outside users can access the
local server using the P-660R-Tx v3's
WAN IP
address which can be obtained
from Web Configurator,
Status -> Device Info
.
For example:
Configuring an internal Web server for outside access
(suppose the
Server IP Address is 192.168.1.33):
Enable DMZ and fill in the DMZ Host IP
Address, press button „Save‟
Note that there are some default ports for different applications. If you want to
change them, you could write it in the start port number and end port number
columns and
press button „Save‟ to submit your settings.
