P-661HW-D Series Support Notes
Trap
Destination
Enter the IP address of the NMS that you wish to send the traps to.
If
0.0.0.0 is entered, the P-661HW-DHW-DX will not send trap any NMS
manager.
Note: You may need to edit a firewall rule to permit SNMP Packets.
8. Using syslog
You can configure it in Web Configurator, Advanced Setup,
Maintenance ->
Logs -> Log Settings -> Syslog logging.
Key Settings:
Active
: Select it to active UNIX Syslog.
Syslog IP Address:
Enter the IP address of the UNIX server that you wish to
send the syslog.
Log Facility:
Select from the 7 different local options. The log facility lets you
log the message in different server files. Refer to your UNIX manual.
9. Using IP Alias
•
What is IP Alias ?
In a typical environment, a LAN router is required to connect two local
networks. The P-661HW-D can connect three local networks to the ISP or a
remote node, we call this function as
'IP Alias'
. In this case, an internal router
is not required. For example, the network manager can divide the local
network into three networks and connect them to the Internet using
P-661HW-D's single user account. See the figure below.
78
All contents copyright © 2006 ZyXEL Communications Corporation.
