P-870MH-C1 Quick Start Guide
3
• If the problem continues, contact your local vendor.
2
The
ALARM
light is on.
• The
ALARM
light blinks once during system startup. If
the
ALARM
light stays on, the system startup test has
failed on your P-870MH-C1. Contact your local vendor.
3
The
POWER
light is on, and the
ALARM
light is off, but the
VDSL
light is blinking slowly.
• Check the connection from the
DSL
port to the tele-
phone jack.
• Connect the
DSL
port to a different telephone jack.
• Make sure VDSL service is activated for the telephone
jack.
• If the problem continues, contact your DSL service
provider.
4
The
POWER
light is on and the
ALARM
light is off, but the
ETHERNET
light(s) is also off.
• The
ETHERNET
light is off if you have not connected a
computer to that port.
• Check the Ethernet connection between the
ETHER-
NET
port and computer.
• If the connection is secure, inspect the Ethernet cable
for damage.
• If the Ethernet cable does not appear to be damaged,
check the length of the cable. Ethernet cables must be
less than 100 meters.
5
I cannot connect to the Internet.
