Chapter 24 SNMP
PMG5318-B20B User’s Guide
117
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an
agent. In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it
initiates a Get operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.
Click
Management > SNMP Agent
to open the following screen. Use this screen to configure the
GPON Device SNMP settings.
Figure 95
SNMP
Table 83
SNMP
LABEL
DESCRIPTION
SNMP Agent
Select
Enable
to let the GPON Device act as an SNMP agent, which allows a manager
station to manage and monitor the Device through the network. Select
Disable
to turn
this feature off.
Read Community
Enter the
Read Community
, which is the password for the incoming Get and GetNext
requests from the management station.
Set Community
Enter the
Set community
, which is the password for incoming Set requests from the
management station.
System Name
Enter the SNMP system name.
System Location
Enter the SNMP system location.
System Contact
Enter the SNMP system contact.
Trap Manager IP
Type the IP address of the station to send your SNMP traps to.
Save/Apply
Click this to save your changes back to the GPON Device.
