Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
118
Condition
Select under what circumstances you want the Prestige to use this call
forwarding entry.
Select
Unconditional
to have the Prestige immediately forward any calls
from the number specified in the
Incoming Call Number
field to the
number in the
Forward to Number
field.
Select
Busy
to have the Prestige forward any calls from the number
specified in the
Incoming Call Number
field to the number in the
Forward
to Number
field when your SIP account has a call connected.
Select
No Answer
to have the Prestige forward any calls from the number
specified in the
Incoming Call Number
field to the number in the
Forward
to Number
field when the
No Answer Waiting Time
period expires
(whether or not the no answer feature is enabled in the
Forward to
Number Setup
section).
Select
Block
to have the Prestige reject calls from the number specified in
the call forwarding entry.
Select
Accept
to have the Prestige allow calls from the number specified in
the
Incoming Call Number
field.
Apply
Reset
Click
Apply
to save your changes back to the Prestige.
Click
Reset
to begin configuring this screen afresh.
Internal Call
This feature is ZyXEL proprietary implementation.
When you have two phones attached to the P2602RLx phone ports, you just dial "####" on one of the two
phones, another phone will ring.
MWI
Message Waiting Indication is a common feature of telephone networks. It typically involves an audible or
visible indication that messages are waiting, such as playing a special dial tone (which in telephone networks is