Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
128
d.
Click Backup. A screen displays prompting you to specify a location to store the configuration file.
e.
Click Save file and browse to where you want the file to be saved.
f.
Click Save.
How do I back up/restore configurations using an FTP client program through the LAN?
a.
Use an FTP client program in your computer (such as the Cuteftp or wsftp client) to log into your
Prestige.
b.
To back up current device configuration, use the FTP client program to get the 'rom-0' file from the
Prestige.
c.
To restore device configuration, use the FTP client program to put a configuration file (rename to
ROM-0) on the Prestige.
Why can't I telnet into Prestige from the WAN?
The following lists the possible reasons why you cannot telnet into the Prestige from the WAN.
a.
You did not enable the Telnet service on WAN interface for remote management in SMT menu 24.11.
b.
Telnet service is enabled but your computer IP address is not included in the secured host list in SMT
menu 24.11. In this case, you will see the 'Client IP is not allowed!' error message in the Telnet screen.
c.
The default filter rule 3 (Telnet_FTP_WAN) is applied in the Input Protocol field in SMT menu 11.5.
This blocks access from the WAN.
What should I do if I forget the system password?
In case you forget the system password. You can reset the unit back to the factory defaults. You can do this
by using a sharp pointed object (such as a pen) to press and hold down the Reset button for 5 seconds or until
the power LED starts to blink, then release. The unit is reset back to the factory defaults. The reset button is
located near the power jack on the unit’s back panel
Note: Resetting the unit back to the factory defaults erases all your previous settings.
What is SUA? When should I use SUA?
SUA (Single User Account) is a unique feature supported by the Prestige to allow more than one person to
access the Internet concurrently for the cost of a single user account.
When Prestige acting as SUA receives a packet from a local client destined for the outside Internet, it replaces
the source address in the IP packet header with its own address and the source port in the TCP or UDP header
