Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
24
The following table describes the options for Network Address Translation.
Field
Options
Description
Network Address Translation
Full Feature
When you select this option the SMT will use Address
Mapping Set 1 (Menu 15.1-see later for further
discussion).
None
NAT is disabled when you select this option.
SUA Only
When you select this option the SMT will use Address
Mapping Set 255 (Menu 15.1-see later for further
discussion). This option use basically Many-to-One
Overload mapping. Select
Full Feature
when you
require other mapping types. It is a convenient,
pre-configured, read only, Many-to-One mapping set,
sufficient for most purposes and helpful to people
already familiar with SUA in previous ZyNOS
versions. Note that there is also a
Server
type whose
IGA is
0.0.0.0
in this set.
2. Configuring NAT
To configure NAT, enter 15 from the Main Menu to bring up the following screen.
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
3. Address Mapping Sets and NAT Server Sets
Use the Address Mapping Sets menus and submenus to create the mapping table used to assign global addresses
to LAN clients. Each remote node must specify which NAT Address Mapping Set to use. The P2602HWL has
8 remote nodes and so allows you to configure 8 NAT Address Mapping Set. You can see nine NAT Address