Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
47
Rem Password= ********
Outgoing: Session Options:
My Login= testt Edit Filter Sets= Yes
My Password= *****
Authen= CHAP/PAP
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
The SMT does not allow you to apply a protocol filter set (configured in menu 21) to the device filters field in
menu 3.1 or 11.5. Likewise, you cannot apply a device filter in the protocols filters field. However, the SMT
cannot detect whether you have configured device and protocol filter rules in the same filter set. This was
allowed in the pre-ZyNOS v3.40 firmware. Thus when you upgrade the firmware to ZyNOS v3.40, the old
configuration is translated to the new format and any filter configuration inconsistence is logged. It is highly
recommended that you check the system log (in SMT menu 24.3.1) before setting up the device on the network.
Note: The Prestige automatically deactivates the routing/bridging functions when an inconsistency is detected in
the filter rule settings.
Filter to block web services
Configuration
Before configuring a filter, you need to know the following information:
