Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
52
2.Create one rule to block all packets from this client.
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0 IP Source Route= No
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #=
Port # Comp= None
Source: IP Addr= 192.168.1.5
IP Mask= 255.255.255.255
Port #=
Port # Comp= None
TCP Estab= N/A
More= No Log= None
Action Matched= Drop
Action Not Matched= Forward
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Source IP addr................Enter the IP address of the computer you want to block in this field
IP Mask..........................Enter the IP subnet mask bits in this field. For example, to block only one computer,
enter 255.255.255.255.
Action Matched................Select 'Drop' to discard all the packets from this computer
Action Not Matched.........Select 'Forward' to allow the packets from other computers.
3. After you have configure the filter rule, you can apply this filter set in the (by entering ‚1‛) in the
'Output
Protocol Filter Set'
field for remote node setup.
A filter to block a specific MAC address
