Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
56
Action Matched=
Enter the action on the matched packets. In this case, we will drop it.
Action Not Matched=
Enter the action on packets that do not match the mask. In this example, we will forward it. If you
want to configure more rules, select 'Check Next Rule' to start configuring a next rule. However,
note that the new rule 'Filter Type' must be of the same type (in this example, 'Generic Filter
Rule'). You must configure the Generic and TCPIP (IPX) filter rules in different filter sets.
Menu 21.1.2 - Generic Filter Rule
Filter #: 1,2
Filter Type= Generic Filter Rule
Active= Yes
Offset= 6
Length= 6
Mask= ffffffffffff
Value= 0080c810234a
More= No Log= None
Action Matched= Drop
Action Not Matched= Forward
You can now apply the generic filter rule set in SMT Menu 3.1
- General Ethernet Setup.
Note that you can
only select
'Generic Filter'
in the
'Device Filter'
field, but not in the
'Protocol Filter' field which allows you to
apply
the TCPIP and IPX filters.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters= 1
Output Filter Sets:
protocol filters=
device filters=
