Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
75
-r
allows the syslog facility to receive messages from the network using an Internet domain socket with the
syslog services. The default setting is NOT enabled.
2.Add the following commands at the end of the
/etc/syslog.conf
file.
local1.* /var/log/zyxel.log
Where /var/log/zyxel.log is the full path of the log file.
3. Restart syslogd.
CDR
log
(call messages)
Format:
sdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
C01 Incoming Call xxxxBps xxxxx (L2TP,xxxxx is the Remote Call ID)
C01 Incoming Call xxxx (the connected speed) xxxxx (the Remote Call ID)
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (the connected speed) xxxxx (the Remote Call ID)
C02 CLID call refused
L02 Call Terminated
C02 Call Terminated
Example:
Feb 14 16:57:17 192.168.1.1 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 18, C01 Incoming
Call OK
Feb 14 17:07:18 192.168.1.1 ZyXEL Communications Corp.: board 0 line 0 channel 0, call 18, C02 Call Terminated
Packet triggered log