Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
79
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server TCP/IP Setup:
Client IP Pool:
Starting Address=
192.168.1.33
IP Address=
192.168.1.1
Size of Client IP Pool= 32 IP Subnet Mask= 255.255.255.0
First DNS Server= From ISP RIP Direction= Both
IP Address= N/A Version= RIP-1
Second DNS Server= From ISP Multicast= None
IP Address= N/A Edit IP Alias=
Yes
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Field Settings:
DHCP Setup
If the Prestige's DHCP server is enabled, configure the client address pool for any of the
three logical networks.
TCP/IP Setup
Enter the first LAN IP address for the Prestige. This will create the first route entry on
the enif0 interface.
Edit IP Alias
Press [SPACE] to select
Yes
and press enter to display SMT Menu 3.2.1 – IP Alias Setup
to configure the second and third logical networks on the Prestige.
2. In menu 3.2.1, set the LAN IP address for the second and third logical networks on the Prestige.
Menu 3.2.1 - IP Alias Setup
IP Alias 1=
Yes
IP Address=
192.168.2.1
IP Subnet Mask=
255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=