Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
83
Apply the schedule to the Remote node
Multiple scheduling rules can program in a Remote node, and they have priority. For example, if we program
the sets as 1,2,3,4 in remote node, then the set 1 will override set 2,3,4. set 2 will override 3,4, and so on.
System Date and Time Settings on the Prestige
Since the Prestige does not contain a RTC (Real-Time Clock) chip, you need to set the Prestige to obtain the
current time and date information from an external time server during system booting. You can set the Prestige
to use Daytime protocol(RFC-867), Time protocol(RFC-868) or NTP protocol(RFC-1305) time service. To use
the time service, you need to specify the IP address of the external time server. Once configured, the Prestige is
able to obtain the current time, date and the time zone information from the external time server.