Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
88
Menu 11.6 - Traffic Redirect Setup
Active= Yes
Configuration:
Backup Gateway IP Address= 192.168.1.50
Metric= 14
Check WAN IP Address= 202.13.154.1
Fail Tolerance= 5
Period(sec)= 30
Timeout(sec)= 3
Press ENTER to Confirm or ESC to Cancel:
Field Settings:
Active
Press [Space BAR] and select
Yes
(to enable) or
No
(to disable) for traffic redirect.
Backup
Gateway
IP
Address
The IP address of your backup gateway. The Prestige automatically forwards outgoing
traffic to this IP address if the Prestige's Internet connection is down.
Metric
Enter a number from 1 to 15 to give your traffic redirect route a priority. The smaller the
number, the higher priority the route has.
Check WAN IP
Address
Enter the IP address of a reliable nearby computer (for example, your ISP’s DNS server
address) to test your Prestige’s WAN accessibility.
The Prestige uses the default gateway IP address if you do not enter an IP address here.
If you are using PPPoE Encapsulation, enter “0.0.0.0” to configure the Prestige to check
the PVC (Permanent Virtual Circuit)
.
Fail Tolerance
Enter the number of times your Prestige may attempt and fail to connect to the
Internet before traffic is forwarded to the backup gateway. Two to five is usually a
good number.
Period
Specify how long the Prestige waits before pinging the IP address to check the WAN
connection.
Timeout (sec)
Enter the number of seconds the Prestige waits for a ping response from the IP Address