Prestige 2302RL Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
97
Step 6. You associate the SIP account to a specified phone port on the ZyXEL device. This allows you to set
which phone(s) to use (ring) when an incoming call is received.
Step 7. Click on Apply to save the changes and make the settings take effect. If you want to configure the
second SIP account, select SIP2 in the SIP Account field and follow steps 1 – 6.
Note:
If you associate both phone ports are associated with both SIP accounts, you cannot identify which
account’s incoming call is received.
The following table describes the screen labels.
Label
Description
SIP Account
You can configure the Prestige to use multiple SIP accounts. Select one to
configure its settings on the Prestige.
SIP Number
A SIP account's Uniform Resource Identifier (URI) identifies the SIP
account in a way similar to the way an e-mail address identifies an e-mail
account. It is also known as a SIP identity or address. The format of a SIP
identity is SIP-Number@SIP-Srevice-Domain.
A SIP number is the part of the SIP URI that comes before the "@" symbol.
Enter your SIP number in this field. You can use up to 31 ASCII
characters.
SIP Local Port
Use this field to configure the Prestige’s listening port for SIP. Leave this
field set to the default if you were not given a local port number for SIP.
SIP
Server
Address
Type the IP address of the SIP server in this field.
SIP
Server
Port
Enter the SIP server’s listening port for SIP in this field. Leave this field set
to the default if your VoIP service provider did not give you a local port