Prestige 2602H/HL Series Quick Start Guide
7
3
The next wizard screen varies depending on the
Encapsulation
you chose in the first wizard screen. From
the
Network Address Translation
drop-down list box, select
SUA Only
if you have one public IP address,
Full Feature
if you have more than one public IP address (for translation) or
None
to disable NAT.
Note:
You will only see the next two screens in
Routing
mode.
4
Fill in the fields with information from your voice service provider. Leave the default settings in fields for
which no information was provided (except if otherwise specified).
Note:
You should have a voice account already set up.
This screen configures SIP account 1. Use the VoIP screens to configure SIP account 2.
•
PPPoE
Select
Connect
on Demand
when you don't
want the
connection up
all the time and
specify an idle
time-out period
(in seconds) in
the
Max. Idle
Timeout
field.
Select
Nailed-
Up Connection
when you want your connection up all
the time. The Prestige will try to bring up the
connection automatically if it is disconnected.
•
ENET
ENCAP
• PPPoA
• RFC1483
