manualshive.com logo in svg

ZyXEL Communications Prestige 652H series, User Manual

The ZyXEL Communications Prestige 652H series offers an innovative networking solution for your home or office. Discover the full potential of this advanced product with our comprehensive User Manual, available for free download on our website. Unlock all the features and functionalities effortlessly, ensuring maximum convenience and efficiency. Download the manual now from 88.208.23.73:8080 to revolutionize your networking experience.

Share
Download
background image

Prestige 652H/HW Series User’s Guide 

xx 

List of Figures 

Figure 36-4 Menu 23 System Security .........................................................................................................36-3

 

Figure 36-5 Menu 23.4 System Security : IEEE802.1x................................................................................36-4

 

Figure 36-6 Menu 14 Dial-in User Setup......................................................................................................36-7

 

Figure 36-7 Menu 14.1 Edit Dial-in User.....................................................................................................36-7

 

Figure 37-1 Menu 24 System Maintenance ..................................................................................................37-1

 

Figure 37-2 Menu 24.1 System Maintenance : Status ..................................................................................37-2

 

Figure 37-3 Menu 24.2 System Information and Console Port Speed..........................................................37-3

 

Figure 37-4 Menu 24.2.1 System Maintenance : Information ......................................................................37-4

 

Figure 37-5 Menu 24.2.2 System Maintenance : Change Console Port Speed.............................................37-5

 

Figure 37-6 Menu 24.3 System Maintenance : Log and Trace .....................................................................37-5

 

Figure 37-7 Sample Error and Information Messages ..................................................................................37-6

 

Figure 37-8 Menu 24.3.2 System Maintenance : Syslog and Accounting ....................................................37-6

 

Figure 37-9 Menu 24.4 System Maintenance : Diagnostic...........................................................................37-8

 

Figure 38-1 Telnet in Menu 24.5 ..................................................................................................................38-3

 

Figure 38-2 FTP Session Example................................................................................................................38-4

 

Figure 38-3 Menu 24.5 System Maintenance : Backup Configuration.........................................................38-6

 

Figure 38-4 Menu 24.5 System Maintenance : Starting Xmodem Download Screen ..................................38-6

 

Figure 38-5 Backup Configuration Example ................................................................................................38-7

 

Figure 38-6 Successful Backup Confirmation Screen ..................................................................................38-7

 

Figure 38-7 Telnet into Menu 24.6 ...............................................................................................................38-8

 

Figure 38-8 Restore Using FTP Session Example ........................................................................................38-9

 

Figure 38-9 System Maintenance : Restore Configuration...........................................................................38-9

 

Figure 38-10 System Maintenance : Starting Xmodem Download Screen...................................................38-9

 

Figure 38-11 Restore Configuration Example ............................................................................................38-10

 

Figure 38-12 Successful Restoration Confirmation Screen ........................................................................38-10

 

Figure 38-13 Telnet Into Menu 24.7.1 Upload System Firmware ..............................................................38-11

 

Figure 38-14 Telnet Into Menu 24.7.2 System Maintenance ......................................................................38-11

 

Figure 38-15 FTP Session Example of Firmware File Upload ...................................................................38-12

 

Figure 38-16 Menu 24.7.1 as seen using the Console Port.........................................................................38-14

 

Figure 38-17 Example Xmodem Upload....................................................................................................38-14

 

Figure 38-18 Menu 24.7.2 as seen using the Console Port.........................................................................38-15

 

Figure 38-19 Example Xmodem Upload....................................................................................................38-16

 

Figure 39-1 Command Mode in Menu 24 ....................................................................................................39-1

 

Figure 39-2 Valid Commands .......................................................................................................................39-2

 

Figure 39-3 Menu 24.9 System Maintenance : Call Control ........................................................................39-2

 

Figure 39-4 Menu 24.9.1 System Maintenance : Budget Management........................................................39-3

 

Figure 39-5 Menu 24 System Maintenance ..................................................................................................39-4

 

Figure 39-6 Menu 24.10 System Maintenance: Time and Date Setting .......................................................39-4

 

Figure 40-1 Menu 24.11 Remote Management Control ...............................................................................40-2

 

Figure 41-1 Menu 25 IP Routing Policy Setup.............................................................................................41-2

 

Figure 41-2 Menu 25.1 IP Routing Policy Setup..........................................................................................41-3

 

Summary of Contents for Prestige 652H series








































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Prestige 652H series

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Brand: Yamaha Pages: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Brand: Yamaha Pages: 5
Idis DR-6100 Series Operation Manual preview
DR-6100 Series
Brand: Idis Pages: 86
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Paradyne COMSPHERE 3610 Installation Instructions preview
COMSPHERE 3610
Brand: Paradyne Pages: 2
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Brand: Cabletron Systems Pages: 42
Buffalo BS-GS2008P Quick Setup Manual preview
BS-GS2008P
Brand: Buffalo Pages: 2
Altimium CVHH2 User Manual preview
CVHH2
Brand: Altimium Pages: 12
Enterasys Security Router X-PeditionTM User Manual preview
Security Router X-PeditionTM
Brand: Enterasys Pages: 466
Toto Link ND300V2 Manual preview
ND300V2
Brand: Toto Link Pages: 57
M-Audio FireWire 1814 Manual Del Usuario preview
FireWire 1814
Brand: M-Audio Pages: 67
Omron JUNMA PULSE Datasheet preview
JUNMA PULSE
Brand: Omron Pages: 4
Riverbed Cascade Express Installation Manual preview
Cascade Express
Brand: Riverbed Pages: 92
Planet VR-300 Series User Manual preview
VR-300 Series
Brand: Planet Pages: 136
Extreme Networks ExtremeCloud Appliance E3120 Installation Manual preview
ExtremeCloud Appliance E3120
Brand: Extreme Networks Pages: 27
Billion Bipac 74 Series Instructions Manual preview
Bipac 74 Series
Brand: Billion Pages: 8
Watchguard Firebox T85-PoE Hardware Manual preview
Firebox T85-PoE
Brand: Watchguard Pages: 27

Brands by name

Popular brands

Load more brands