Prestige 652H/HW Series User’s Guide
VPN Screens
16-25
Table 16-9 VPN Manual Setup
LABEL
DESCRIPTION
Remote
Remote IP addresses must be static and correspond to the remote IPSec router's configured local IP
addresses.
Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have
the same local or remote IP address, but not both. You can configure multiple SAs between the same local
and remote IP addresses, as long as only one is active at any time.
Remote Address
Type
Use the drop-down menu to choose
Single
,
Range
, or
Subnet
. Select
Single
with
a single IP address. Select
Range
for a specific range of IP addresses. Select
Subnet
to specify IP addresses on a network by their subnet mask.
IP Address Start When the
Remote Address Type
field is configured to Single, enter a (static) IP
address on the network behind the remote IPSec router. When the
Remote
Address Type
field is configured to
Range
, enter the beginning (static) IP address,
in a range of computers on the network behind the remote IPSec router. When the
Remote Address Type
field is configured to
Subnet
, enter a (static) IP address on
the network behind the remote IPSec router.
End / Subnet Mask When the
Remote Address Type
field is configured to
Single
, this field is N/A.
When the
Remote Address Type
field is configured to
Range
, enter the end
(static) IP address, in a range of computers on the network behind the remote IPSec
router. When the
Remote Address Type
field is configured to
Subnet
, enter a
subnet mask on the network behind the remote IPSec router.
Address Information
My IP Address Enter the WAN IP address of your Prestige. The VPN tunnel has to be rebuilt if this
IP address changes.
The following applies if this field is configured as
0.0.0.0
:
The Prestige uses the current Prestige WAN IP address (static or dynamic) to
set up the VPN tunnel.
If the WAN connection goes down, the Prestige uses the dial backup IP
address for the VPN tunnel when using dial backup or the LAN IP address
when using traffic redirect. See the chapter on WAN for details on dial backup
and traffic redirect.
Secure Gateway
Address
Type the WAN IP address or the URL (up to 31 characters) of the IPSec router with
which you're making the VPN connection.
Security Protocol
Summary of Contents for Prestige 652H series
