Chapter 7 Monitor
UAG Series User’s Guide
110
The following table describes the icons in this screen.
7.13.1 Station Count of AP
Use this screen to look at station statistics for the connected AP. To access this screen, select an
entry and click the
More Information
button in the
AP List
screen. Use this screen to look at
LED Status
This displays the AP LED status.
N/A
displays if the AP does not support LED suppression mode and/or have a locator LED
to show the actual location of the AP.
A gray LED icon signifies that the AP LED suppression mode is enabled. All the LEDs of the
AP will turn off after the AP is ready.
A green LED icon signifies that the AP LED suppression mode is disabled and the AP LEDs
stay lit after the AP is ready.
A sun icon signifies that the AP’s locator LED is blinking.
A circle signifies that the AP’s locator LED is extinguished.
Refresh
Click this button to update the information in the screen.
Table 36
Monitor > Wireless > AP Information > AP List Icons
LABEL
DESCRIPTION
This AP is not on the management list.
This AP is on the management list and online.
This AP is in the process of having its firmware updated.
This AP is on the management list but offline.
This indicates one of the following cases:
•
This AP has a runtime management VLAN ID setting that conflicts with the VLAN ID setting on
the Access Controller (the UAG).
•
A setting the UAG assigns to this AP does not match the AP’s capability.
Table 35
Monitor > Wireless > AP Information > AP List (continued)
LABEL
DESCRIPTION
