Chapter 9 Wireless
UAG Series User’s Guide
137
9.2 Controller Screen
Use this screen to set how the UAG allows new APs to connect to the network. Click
Configuration
> Wireless > Controller
to access this screen.
Figure 94
Configuration > Wireless > Controller
Each field is described in the following table.
9.3 AP Management Screen
Use this screen to manage all of the APs connected to the UAG. Click
Configuration > Wireless >
AP Management
to access this screen.
Figure 95
Configuration > Wireless > AP Management
Table 53
Configuration > Wireless > Controller
LABEL
DESCRIPTION
Registration
Type
Select
Manual
to add each AP to the UAG for management, or
Always Accept
to
automatically add APs to the UAG for management.
Note: Select the
Manual
option for managing a specific set of APs. This is recommended as the
registration mechanism cannot automatically differentiate between friendly and rogue
APs. For details on how to handle rogue APs, see
.
APs must be connected to the UAG by a wired connection or network.
Apply
Click
Apply
to save your changes back to the UAG.
Reset
Click
Reset
to return the screen to its last-saved settings.
