Chapter 9 Wireless
UAG Series User’s Guide
141
Figure 97
Configuration > Wireless > AP Management > Edit AP List > Edit Port
Each field is described in the following table.
9.3.3 VLAN Add/Edit
Use this screen to create a new VLAN or configure an existing VLAN on the UAG.
To access this screen, click
Add
or select a VLAN and click the
Edit
button in the
VLAN Member
Configuration
table of the
Configuration > Wireless > AP Management > Edit AP List
screen.
Table 56
Configuration > Wireless > AP Management > Edit AP List > Edit Port
LABEL
DESCRIPTION
Enable
Select this option to activate the port. Otherwise, deselect it.
Name
This shows the name of the port.
Native VID (PVID)
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
Enter the PVID from 1 to 4094 for this port.
OK
Click
OK
to save your changes back to the UAG.
Cancel
Click
Cancel
to close the window with changes unsaved.
