Chapter 16 HTTP Redirect
UAG Series User’s Guide
233
Figure 151
Configuration > Network > HTTP Redirect
The following table describes the labels in this screen.
16.2.1 The HTTP Redirect Edit Screen
Click
Network > HTTP Redirect
to open the
HTTP Redirect
screen. Then click
the
Add
or
Edit
icon to open the
HTTP Redirect Edit
screen where you can configure the rule.
Figure 152
Network > HTTP Redirect > Edit
Table 101
Configuration > Network > HTTP Redirect
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click
Edit
to open a screen where you can modify the
entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The UAG confirms you want to remove it
before doing so.
Activate
To turn on an entry, select it and click
Activate
.
Inactivate
To turn off an entry, select it and click
Inactivate
.
#
This field is a sequential value, and it is not associated with a specific entry.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
Name
This is the descriptive name of a rule.
Interface
This is the interface on which the request must be received.
Proxy Server
This is the IP address of the proxy server.
Port
This is the service port number
used by the proxy server.
Apply
Click
Apply
to save your changes back to the UAG.
Reset
Click
Reset
to return the screen to its last-saved settings.
