ZyXEL Communications UAG2100 User Manual Download

Page: 403 / 617

Chapter 35 User/Group

UAG Series User’s Guide

403

The user name can only contain the following characters:

• Alphanumeric A-z 0-9 (there is no unicode support)
• _ [underscores]
• - [dashes]

The first character must be alphabetical (A-Z a-z), an underscore (_), or a dash (-). Other
limitations on user names are:

• User names are case-sensitive. If you enter a user 'bob' but use 'BOB' when connecting via CIFS

or FTP, it will use the account settings used for 'BOB' not ‘bob’.

• User names have to be different than user group names.
• Here are the reserved user names:

To access this screen, go to the

User

screen (see

Section 35.2 on page 401

), and click either the

Add

icon or an

Edit

icon.

Figure 271

Configuration > Object > User/Group > User > Add/Edit

•

adm

•

admin

•

any

•

bin

•

daemon

•

debug

•

devicehaecived •

ftp

•

games

•

halt

•

ldap-users

•

mail

•

news

•

nobody

•

operator

•

radius-users

•

root

•

shutdown

•

sshd

•

sync

•

uucp

•

zyxel

Summary of Contents for UAG2100










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UAG2100

Reviews:

Related manuals for UAG2100

Brands by name

Popular brands

ZyXEL Communications UAG2100, User Manual

Search results

Summary of Contents for UAG2100

Reviews:

Related manuals for UAG2100

Brands by name

Popular brands