UAG Series User’s Guide
42
C
H A P T E R
3
Printer Deployment
3.1 Overview
This chapter shows you how to set up an external statement printer (SP350E for example) and
deploy it in your network with the UAG.
In the following examples, you will:
•
.
•
Set up an Internet Connection on the UAG
.
•
Allow the UAG to Monitor and Manage the Printer
•
Turn on Web Authentication on the UAG
.
•
.
3.2 Attach the Printer to the UAG
This section uses the SP350E as an example. Refer to the printer documentation for detailed
information about paper loading.
1
Connect the Ethernet port of the printer to one LAN port of the UAG.
2
Connect the power socket of the printer to a power outlet. Turn on the printer.
The printer is acting as a DHCP client by default and will obtain an IP address from the connected
UAG. Make sure the UAG is turned on already and the DHCP server is enabled on its LAN
interface(s).
3.3 Set up an Internet Connection on the UAG
1
Connect the WAN port of the UAG to a broadband modem or router.
2
Connect your compurt to one of the available LAN port on the UAG.
3
Log into the UAG web configurator. See
configurator.
4
Enter your Internet access information to set up a Internet connection. See
for detailed information on how to use the setup wizard.
