Chapter 39 Addresses
UAG Series User’s Guide
443
Figure 298
Configuration > Object > Address > Address
The following table describes the labels in this screen. See
for more
information as well.
39.2.1 Address Add/Edit Screen
The
Configuration > Object > Address Add/Edit
screen allows you to create a new address or
edit an existing one. To access this screen, go to the
Address
screen (see
), and click either the
Add
icon or an
Edit
icon in the
Configuration
section.
Table 204
Configuration > Object > Address > Address
LABEL
DESCRIPTION
Configuration
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click
Edit
to be able to modify the entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The UAG confirms you want to remove it
before doing so.
Object Reference Select an entry and click
Object Reference
to open a screen that shows which settings
use the entry. See
for an example.
#
This field is a sequential value, and it is not associated with a specific address.
Name
This field displays the configured name of each address object.
Type
This field displays the type of each address object. “
INTERFACE
” means the object uses
the settings of one of the UAG’s interfaces.
IPv4 Address
This field displays the IPv4 addresses represented by each address object. If the object’s
settings are based on one of the UAG’s interfaces, the name of the interface displays first
followed by the object’s current address settings.
Reference
This displays the number of times an object reference is used in a profile.
