Chapter 40 Services
UAG Series User’s Guide
450
Figure 303
Configuration > Object > Service > Service > Edit
The following table describes the labels in this screen.
40.3 The Service Group Summary Screen
The
Service Group
summary screen provides a summary of all service groups. In addition, this
screen allows you to add, edit, and remove service groups.
To access this screen, log into the Web Configurator, and click
Configuration > Object
>
Service
>
Service Group
.
Table 209
Configuration > Object > Service > Service > Edit
LABEL
DESCRIPTION
Name
Type the name used to refer to the service. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
IP Protocol
Select the protocol the service uses. Choices are:
TCP
,
UDP
,
ICMP
, and
User Defined
.
Starting Port
Ending Port
This field appears if the
IP Protocol
is
TCP
or
UDP
. Specify the port number(s) used by
this service. If you fill in one of these fields, the service uses that port. If you fill in both
fields, the service uses the range of ports.
ICMP Type
This field appears if the
IP Protocol
is
ICMP
.
Select the ICMP message used by this service. This field displays the message text, not the
message number.
IP Protocol
Number
This field appears if the
IP Protocol
is
User Defined
.
Enter the number of the next-level protocol (IP protocol). Allowed values are 1 - 255.
OK
Click
OK
to
save your changes back to the UAG.
Cancel
Click
Cancel
to exit this screen without saving your changes.
