ZyXEL Communications UAG2100 User Manual Download

Page: 451 / 617

Chapter 40 Services

UAG Series User’s Guide

451

Figure 304

Configuration > Object > Service > Service Group

The following table describes the labels in this screen. See

Section 40.3.1 on page 451

for more

information as well.

40.3.1 The Service Group Add/Edit Screen

The

Service Group Add/Edit

screen allows you to create a new service group or edit an existing

one. To access this screen, go to the

Service Group

screen (see

Section 40.3 on page 450

), and

click either the

Add

icon or an

Edit

icon.

Table 210

Configuration > Object > Service > Service Group

LABEL

DESCRIPTION

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click

Edit

to be able to modify the entry’s settings.

Remove

To remove an entry, select it and click

Remove

. The UAG confirms you want to remove it

before doing so.

Object Reference Select an entry and click

Object Reference

to open a screen that shows which settings

use the entry. See

Section 10.3.2 on page 165

for an example.

This field is a sequential value, and it is not associated with a specific service group.

Name

This field displays the name of each service group.

By default, the UAG uses services starting with “Default_Allow_” in the security policies to
allow certain services to connect to the UAG.

Description

This field displays the description of each service group, if any.

Reference

This displays the number of times an object reference is used in a profile.

Summary of Contents for UAG2100










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UAG2100

Reviews:

Related manuals for UAG2100

Brands by name

Popular brands

ZyXEL Communications UAG2100, User Manual

Search results

Summary of Contents for UAG2100

Reviews:

Related manuals for UAG2100

Brands by name

Popular brands