Chapter 9 Wireless
UAG4100 User’s Guide
111
MAC
This displays the MAC address of the selected AP.
Model
This field displays the AP’s hardware model information. It displays
N/A
(not
applicable) only when the AP disconnects from the UAG and the information is
unavailable as a result.
Description
Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
Radio 1/2 OP Mode
Select the operating mode for radio 1 or radio 2.
AP Mode
means the AP can receive connections from wireless clients and pass their
data traffic through to the UAG to be managed (or subsequently passed on to an
upstream gateway for managing).
Radio 1/2 Profile
Select a profile from the list. If no profile exists, you can create a new one through the
Create new Object
menu.
VLAN Settings
This section is not available when you are editing the local AP’s settings.
Force Overwrite
VLAN Config
Select this to have the UAG change the AP’s management VLAN to match the
configuration in this screen.
Management VLAN
ID
Enter a VLAN ID for this AP.
As Native VLAN
Select this option to treat this VLAN ID as a VLAN created on the UAG and not one
assigned to it from outside the network.
OK
Click
OK
to save your changes back to the UAG.
Cancel
Click
Cancel
to close the window with changes unsaved.
Table 47
Configuration > Wireless > AP Management > Edit AP List (continued)
LABEL
DESCRIPTION
