Chapter 12 Policy and Static Routes
UAG4100 User’s Guide
164
12.2.1 Policy Route Edit Screen
Click
Configuration > Network > Routing
to open the
Policy Route
screen. Then click
the
Add
or
Edit
icon in the
Configuration
section. The
Add Policy Route
or
Policy Route Edit
screen
opens. Use this screen to configure or edit a policy route.
DSCP Marking
This is how the UAG handles the DSCP value of the outgoing packets that match this route.
If this field displays a DSCP value, the UAG applies that DSCP value to the route’s outgoing
packets.
preserve
means the UAG does not modify the DSCP value of the route’s outgoing packets.
default
means the UAG sets the DSCP value of the route’s outgoing packets to 0.
The “
af
” choices stand for Assured Forwarding. The number following the “
af
” identifies one
of four classes and one of three drop preferences. See
Assured Forwarding (AF) PHB for
SNAT
This is the source IP address that the route uses.
It displays
none
if the UAG does not perform NAT for this route.
Apply
Click
Apply
to save your changes back to the UAG.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 72
Configuration > Network > Routing > Policy Route (continued)
LABEL
DESCRIPTION