ZyXEL Communications UAG4100 User Manual Download

Page: 194 / 477

Chapter 17 HTTP Redirect

UAG4100 User’s Guide

194

The following table describes the labels in this screen.

Table 88

Network > HTTP Redirect > Edit

LABEL

DESCRIPTION

Enable

Use this option to turn the HTTP redirect rule on or off.

Name

Enter a name to identify this rule. You may use 1-31 alphanumeric characters,
underscores(

), or dashes (-), but the first character cannot be a number. This value is

case-sensitive.

Interface

Select the interface on which the HTTP request must be received for the UAG to forward it
to the specified proxy server.

Proxy Server

Enter the IP address of the proxy server.

Port

Enter the port number that the proxy server uses.

Click

to save your changes back to the UAG.

Cancel

Click

Cancel

to exit this screen without saving.

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands

ZyXEL Communications UAG4100, User Manual

Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands