Chapter 25 Firewall
UAG4100 User’s Guide
245
25.3 The Session Control Screen
Click
Configuration > Firewall > Session Control
to display the
Firewall Session Control
screen. Use this screen to limit the number of concurrent NAT/firewall sessions a client can use. You
can apply a default limit for all users and individual limits for specific users, addresses, or both. The
individual limit takes priority if you apply both.
Figure 167
Configuration > Firewall > Session Limit
Access
Use the drop-down list box to select what the firewall is to do with packets that match this
rule.
Select
deny
to silently discard the packets without sending a TCP reset packet or an ICMP
destination-unreachable message to the sender.
Select
reject
to deny the packets and send a TCP reset packet to the sender. Any UDP
packets are dropped without sending a response packet.
Select
allow
to permit the passage of the packets.
Log
Select whether to have the UAG generate a log (
log
), log and alert (
log alert
) or not (
no
)
when the rule is matched. See
for more on logs.
OK
Click
OK
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving.
Table 109
Configuration > Firewall > Add (continued)
LABEL
DESCRIPTION
